Free the Tone QA-2 Quad-Arrow Distortion

Description

Free the Tone QA-2 Quad-Arrow Distortion

Why we love it

Lush and flexible tube amp-like distortion ranging from light crunch to super saturated that sounds great with just about any tube amp or even small practice and solid state amps. This distortion is one of our shop favorites.

Condition

This effects pedal is in Excellent condition. There are minor signs of prior use such as small chips and scuffs scattered around the case.  This unit has been thoroughly tested and all functions are operational. The original packaging and instructions are not included.

Manufacturer Description

The QUAD-ARROW DISTORTION has a new power circuit that was developed for the Free The Tone CustomSOV-2/Overdrive. The sound has been refined to produce a relatively powerful distortion pedal.

The voltage is increased internally to +/-15Vdc to deliver a distortion pedal with a wild amount of power. The effect follows the guitar’s output in a natural way, going from distortion to crunchy or clean as the guitar’s volume is turned down. It responds to picking nuances in the same way. TREBLE and BASS tone controls are provided to allow a wide range of tonal adjustment. Also, you will find that the S/N level is relatively low for a high-gain distortion.

Notice: The Free The Tone Quad-Arrow Distortion was developed to create the best sound in combination with a clean amp/channel such as a Hiwatt. Please note that there may be too much treble if you use the Tone Quad-Arrow Distortion with an amp which has limited headroom and distorts quickly.

Background & Development:

While working in the lab and listening to a Van Halen album I was impressed by the way Eddie could create a variety of sounds by adjusting the volume control on his guitar. The more I listened the more impressed I became, and I decided that I wanted to create a distortion effect that would get crunchy or clean when the guitar’s volume is turned down and deliver full distortion when the volume is turned up. At the same time the distortion would have to be bright without being too heavy, and it would have to deliver the required performance with any amplifier – even a small practice amp! In short, I had decided to make an effect pedal that would deliver tube amp sound.

It wasn’t easy. Achieving tube amp type distortion that responds naturally to guitar volume in an effect pedal is something many pursue but few achieve, and development was dragging on. Then one day I realized that the 9-volt power supply was the root of my problems, causing too much compression and robbing the sound of its edge. At that point the design approach shifted from “effect pedal” to “preamplifier,” so a ±15V power supply of the type used to achieve maximum dynamic range was incorporated, and after adding a bit more “special” technology, the sound I had envisioned finally became a reality. It took a very long time to create the QUAD-ARROW DISTORTION, but we believe you’ll appreciate the difference.

Note: While this pedal is compatible with a 9v battery or AC adaptor, an AC adaptor is recommended for extended use. This is due to the +/-15Vdc internal voltage resulting in 90mA power consumption which will eat through that new alkaline battery in a couple hours. The upside is higher headroom, amazing dynamic range, clarity, and overall sonic performance than operating with +/- 9Vdc internal voltage.

Specifications

Input Impedance: 1MO

Output Impedance: less than 220O

Controls: GAIN, TREBLE, BASS, LEVEL

Connectors: ¼-inch phone jack x 2 (INPUT and OUTPUT) DC9V input jack (AC adaptor jack)

Power Supply: 006P 9V battery or AC adapter (DC9V)

Power Consumption: DC9V, 90mA (Max)

Dimensions: 123 (D) x 100 (W) x 52 (H) mm

Weight: 340g approx. (Not including battery)